✓ InterNACHI® Master Certified ✓ 120-Point Inspection ✓ Reports in 24 Hours
📞 (320) 674-7553
Radon Testing in a Buffalo, MN home
⬥ Buffalo, MN · InterNACHI Master Certified

Radon testing in Buffalo, MN — the gas you can't see.

Wright County sits in Minnesota's high-radon region. A continuous-monitor radon test tells you exactly what's in the air on the lowest level of a Buffalo home before you buy.

★★★★★ 5-star rated✓ Continuous radon monitor✓ Bundle with your inspection
Free 2-Minute Quote

Get your free Buffalo radon testing quote & book online.

Answer a few quick questions, get your free quote now, and pick a time. Radon testing is most affordable bundled with your inspection.

What It Is

A precise measurement of Buffalo's air, not a guess.

Radon is a colorless, odorless radioactive gas that rises from the soil and enters homes through foundation cracks, sump pits, and floor-wall joints. We measure it with a continuous radon monitor placed on the lowest livable level under closed-house conditions, recording hourly readings over at least 48 hours.

Results are reported in picocuries per liter (pCi/L) and compared against the EPA action level of 4.0 pCi/L. It's a quick, valuable add-on to a full home inspection. Learn more about radon testing or about home inspection in Buffalo, MN.

Get Your Free Quote
Radon Testing detail in a Buffalo, MN home
Why It Matters in Buffalo

Buffalo is radon country.

Buffalo is the Wright County seat, ringed by lakes and home to everything from century-old houses in the core to brand-new subdivisions on the edge of town. Its mix of lakeshore lots, historic neighborhoods, and fresh construction gives the same address two very different sets of risks.

Radon test manometer on a radon mitigation pipe
Entry Points

Sump pits & cracks

Buffalo basements draw radon through sump pits, foundation cracks, and floor-wall joints — from lakeshore cottages to new subdivision builds.

Geology — Wright County soils in a Buffalo, MN home
Geology

Wright County soils

Buffalo sits in a part of Wright County where radon readings frequently exceed the EPA action level, regardless of how new the home is.

Living Space — Walkout and finished basements in a Buffalo, MN home
Living Space

Walkout & finished basements

Buffalo's lakeside walkouts and finished lower levels are used daily, increasing exposure time when radon goes unmeasured.

What's Included

What the Buffalo radon test covers.

Continuous Monitor

A professional continuous radon monitor that records hourly readings, not a single passive snapshot.

Proper Placement

Placement on the lowest livable level under closed-house conditions, following EPA testing protocol.

48+ Hour Test

A minimum 48-hour measurement period for an accurate, averaged result you can trust.

pCi/L Results

Results reported in picocuries per liter and compared against the EPA action level of 4.0 pCi/L.

Tamper Awareness

Hourly logging that flags disturbances or open-house conditions affecting the reading.

Clear Guidance

Plain-language explanation of your result and what it means for mitigation, included in your report.

How It Works

Accurate Buffalo results, simply explained.

01

Get your free quote

Use the calculator above to get your instant quote and book the test online.

02

We place the monitor

The continuous monitor is set on the lowest livable level under closed-house conditions.

03

48-hour measurement

The monitor logs hourly readings for at least 48 hours for an accurate average.

04

Get your result

Your pCi/L result and clear next steps delivered in your report, fast.

FAQ

Radon Testing questions for Buffalo, answered.

What is radon and why is it dangerous?
Radon is a colorless, odorless radioactive gas that rises from the soil and seeps into homes through foundations. It is the leading cause of lung cancer among non-smokers in the United States. Because you cannot see or smell it, testing is the only way to know whether a home has a problem.
Do I need a radon test in Buffalo, MN?
Yes. The Minnesota Department of Health reports that more than two in five Minnesota homes test above the EPA action level. Buffalo sits in Wright County's high-radon region, and its mix of older basements and newer finished lower levels means radon can accumulate in spaces families use every day. Levels vary house to house regardless of age, so the only way to know your Buffalo home's level is to test it.
How is radon testing done?
We place a continuous radon monitor on the lowest livable level of the home, typically the basement, under closed-house conditions for a minimum of 48 hours. The monitor records hourly readings, which we average and report in picocuries per liter and compare against the EPA action level of 4.0 pCi/L.
How much does radon testing cost?
Radon testing is affordable on its own and even more so bundled with your home inspection. Use the free instant quote tool on this page to see your exact price in about two minutes and book a time.
What happens if radon levels are high?
If your result is at or above 4.0 pCi/L, the EPA recommends installing a radon mitigation system. These systems vent radon from beneath the foundation to the outside and are highly effective. Your report explains the result clearly so you can plan your next step.

Related services & service area

Pair radon testing with a full home inspection, a sewer scope, or mold testing, or learn more about home inspection in Buffalo, MN. We serve Buffalo and the surrounding Wright County communities.

You can't see radon. Test for it in Buffalo.

Get Your Free Instant Quote
📞 Call Free Instant Quote