Infrared scanning reveals hidden moisture, missing insulation, air leaks, and overheating electrical connections in Buffalo homes — the problems no walk-through can find. Add it to your 120-point inspection.
Add infrared scanning to your inspection in two minutes. Answer a few quick questions, get your free quote now, and pick a time.
A thermal camera reads the surface temperature of every wall, ceiling, and floor it's pointed at. Materials that are wet, poorly insulated, or carrying an electrical fault sit at a different temperature than everything around them — and that difference shows up as a pattern we investigate and confirm.
It's a powerful add-on to a standard 120-point inspection, turning hidden conditions into visible findings. Learn more about thermal imaging or about home inspection in Buffalo, MN.
Get Your Free Quote →
Buffalo is the Wright County seat, ringed by lakes and home to everything from century-old houses in the core to brand-new subdivisions on the edge of town.
Buffalo's lakeshore lots and ringed-by-water setting mean moisture is always nearby, and the town's mix of century-old core homes and fresh subdivisions hides very different energy problems. Infrared finds the wet rim joist on a lake home and the missing insulation behind a builder's drywall on a brand-new one.
Infrared maps the cold patches where attic and wall insulation is thin, settled, or missing entirely — the gaps that drive Buffalo heating bills up all winter long.
A loose or overloaded breaker runs hot long before it fails. Infrared flags those warm spots at the panel — a safety find no visual check in a Buffalo home can make.
Damp drywall, leaking windows, and water tracking behind finishes — confirmed with a moisture meter.
Cold voids in attics and walls where insulation is thin, settled, or never installed.
Drafts at rim joists, outlets, recessed lights, and window frames that bleed conditioned air.
The moisture path an ice dam leaves from the eave down into ceilings and walls.
Overheating breakers and loose connections at the panel that signal a fire risk.
Infrared images of every anomaly, included with your 24-hour report.
Select thermal imaging in the free quote tool above and book it alongside your Buffalo inspection.
We sweep walls, ceilings, attic access, and the electrical panel with the infrared camera.
Suspected moisture is verified with a meter so findings are accurate, not guesses.
Infrared images and plain-language notes delivered with your 24-hour report.
Pair thermal imaging with a full home inspection, a radon test, or mold testing, or learn more about home inspection in Buffalo, MN. We serve Buffalo and the surrounding Wright County communities.